Other products GHIBLI series
- VIEW
sandblasting
NORMAL
NORMAL
sandblasting
DEEP ENGRAVED SLOPING
DEEP ENGRAVED SLOPING
sandblasting
DEEP ENGRAVED
DEEP ENGRAVED
sandblasting
SHADING
SHADING
sandblasting
VARIABLE SHADING
VARIABLE SHADING
sandblasting
LIGHT
LIGHT
sandblasting
DECORATIVE
DECORATIVE
Manual sandblasting cabin with built-in self-cleaning filter.
Optional:
SPECIFICATIONS
- Entry and exit glass supports, each of 400 mm. length.
- Nylon rollers for the manual moving of the glass plate.
- Silencer on the exhaust stack.
Optional:
- 400 mm diameter swivel table.
SPECIFICATIONS
 |
Max. glass size | 860 mm 34“ |
 |
Glass thickness | 1 > 50 mm 1/2” > 2” |
 |
Total power | 1,2 Kw |
 |
Weight | 335 kg 740 lbs |
 |
Dimensions L x P x H | 1720 mm/67” 1150 mm/45” 2200 mm/86” |
 |
Compressed air consumption | 600 lit/min |
 |
Number of sand-blasting guns (standard): - manual gun |
1 |
Features
- Sturdy construction.
- Spray kiln treatment guaranteeing high quality and long-term duration.. All metal parts not sprayed are subjected to a galvanizing treatment protecting them from exposure to atmospheric agents.
- Dust filter (in-built) with completely automatic cleaning feature incorporated in the machine, for filtering the dust generated by the sandblasting process. The dust is captured and filtered in a completely automatic way during the processing through special filtering sleeves (sleeves made out of a special polyester felt guaranteeing extended duration; minimum duration of approx. 2,000 hours) which are subsequently discharged automatically into specific containers positioned in the lower part of the filter. Therefore, the only intervention carried out by the operator on the filter consists in the periodic emptying of the above-mentioned containers. This feature defines the machine as an environment-friendly sandblasting unit since the special filter prevents dust from being spread in the environment and, consequently, inhalation of this dust by the operator is avoided.
- Automatic system for the recovering and recycling of the abrasive material. A special device built into the machine allows the automatic separation of the waste dust from the abrasive material, which is therefore recovered and returned to the work cycle in a completely automatic mode.
- External and internal supports equipped with special bristled rings for maximum protection of the glass during the production process, thus avoiding possible scratches, scoring, etc.
- Coating of the irradiated wall with abrasion-resistant rubber.
- “Circular” rubber sealers on the side apertures in order to guarantee the optimum sealing off of dust.
- Special abrasion-resistant rubber pipes to carry the abrasive material to the sandblasting gun.
- High-performance sandblasting gun, made out of abrasion-resistant material and equipped with a special hard metal nozzle to guarantee long lasting and high efficiency during operations.
- Noise level complying with regulations.
- Machinery complying with EC norms.